General Electric – OEC 9600

The GE OEC 9600 C-arm is a mobile X-ray system that combines enhanced fluoroscopic imaging with the ability to take film radiographs. The OEC 9600 can be used in a variety of diagnostic and surgical applications. Motions The C-arm can orbit in its cradle through an arc of 115 degrees. The back of the C-Arm is marked with an angular scale to aid in positioning. The 9600 can also pivot on its cradle axis up to 180 degrees. This provides greater versatility in positioning the X-ray tube and image intensifier by allowing them to reverse or flip-flop their relative positions. The L-Arm…

Category: C Arm, Imaging X-rays and Tomography

Description

Description

GE OEC 9600 X-Ray System

Specialty Packages Available

GSP
ESP
Vascular
Vascular: 4/8/15 fps
Neurovascular: 30 fps
Cardiac: 30 fps
Super C

Generator

High frequency
4.0 kW full-wave
Up to 120 kVp
Up to 75 mA for radiographic film exposures
Continuous fluoro boost mode up to 12 mA (optional)
Pulsed fluoro mode
Pulsed fluorography mode up to 40 mA
Full power from outlet:
- 50 Hz or 60 Hz
- 100V-15A to 240V-8A
Patented energy buffer design

X-Ray Tube

Rotating anode X-ray tube
Focal spots: 0.3 mm and 0.6 mm
Anode heat capacity: 300,000 HU
Anode cooling rate: 60,000 HU/min
Housing heat capacity: 1,600,000 HU
Anode diameter: 3.1 in
Anode angle:
- 8.5 in (9-inch Image Intensifier)
- 10 in (12-inch Image Intensifier)
X-ray tube cooling fan (Vascular, Neurovascular & Cardiac units)

Collimator

Iris collimation with dual opposing semi-transparent shutters allow elliptical, round and rectangular collimation
Iris and shutters are continuously variable
All functions remotely controlled from the C-Arm control panel